The element coil wounded with fibre glass insulation Teflon coated/stainless steel copper/brass wire braided for cold Storage doors, Drain pipes, Cooling coils, Tray etc.230V/1 PH Available in Standard Lengths of 1, 2, 3, 6, 11, 25 & 50 mtr.
Made out of Copper/Stainless/Incoloy Tube brazed to brass flange and duly nickel plated. All industrial water immersion heaters are meant to heating water only and these must be fully immersed in water before putting them in operation.
Made from special steel/Stainless steel/Incoloy in précised with continues Finns of Stainless steel/ G.I. Especially designed are provided for more deception of heat / more life
Finned air Heater are consisting of two tubular mineral filed elements in one unit Finns are provided for quick dissipation of Heat. It can be installed in any position as per space requirements its 50% wattage can be utilized it required.
These heaters are generally used for plating bath such as nickels, chrome, gold, silver, inclusive ferric and iron chloride solution bright dips and nickels containing, nitric Phosphoric and chromic acid permanganates, per sulphates Supply Voltage 230V/ 1Ph./AC/50Hz
These are rewireable type elements and inserted in the tubing of lead/glass silica titanium/stainless steel etc. its terminals are covered with cap. Fitted with flange for installation. Red marks indicate HOT & COLD portion.
Supply Voltage 230./1Ph/AC/50Hz
Finned Strip Heaters are made of GP Sheathing terminals at one end. Two hotels for horizontal installation. Especially enlarged fines are provided to give long life end more heating surface.
Are made from Brass/Stainless Steel/Special Steel and used to heat oil in various makes of following Air Conditioning Compressors.
These heaters are replaceable type & used for Geysers, Water, Oil, Chemical tanks, Hot Air Chambers, Also made against customers specifications.
Made out of Copper/Stainless/Incoloy Tube brazed to brass flange and duly nickel plated. All industrial water immersion heaters are meant to heating water only and these must be fully immersed in water before putting them in operation.
Air heaters are manufactured out of high temperature resistance chrome nickel steel tube withstand a surface temperature upto 600 C. East element is provided with two adjustable fixing brackets.
Made out of MS Tube brazed to MS flange. All industrial oil immersion heaters are meant to heating oil only and these must be fully immersed in oil before putting them in operation.
For trays, cooling & condensing coils, refrigerators, Deep Freezer etc. Both ends of heaters are sealed & with silicon lead for connections.
Axial Flow Fans, Watts : 40-800 RPM : 700-1400. | Voltage : 230v/1ph& 415v/3ph/AC/50Hz Size : (Sweep): 200-600mm | (8”-24”), 24 Capacitor: Single Phase | Air Volume: 550-10020 M3/h | Static Pressure: 11/26mm ws | Sound Level 45-80 Dba, Grill: Basket